Preparation of Adam Matériaux Grey Glue

Preparation of Adam MatériauxGrey Glue:

grey glue Adam Matériaux must be prepared in accordance with the manufacturer's technical instructions.

Pour the amount of clean water recommended by the manufacturer, between 5 and 5.5 litres , into a clean container , then gradually add the glue powder while mixing with a slow-speed electric mixer.

Mix until a smooth paste is obtained for 3 to 5 minutes, without lumps and pliable enough to allow for even application on EPS panels.

After the first mixing, let the glue rest for the time indicated by the manufacturer, i.e. 2 to 3 minutes, then remix before use, without adding any extra water unless otherwise indicated by the manufacturer.

The consistency of the glue must be adapted to the intended method of application : bonding of EPS panels or creation of the reinforcement layer.

It is important to prepare only the amount that can be used within the glue's shelf life. Glue that has begun to set should not be rehydrated by adding water.

The mixing must be done with clean equipment to avoid any contamination that could impair the performance of the glue.

Important: the water/powder proportions, mixing time, resting time and usage time must be respected in accordance with the grey glue Adam Matériaux.